The MP2672A is a highly integrated, flexible switch-mode battery charger IC for Li-Ion batteries with two cells in series. This makes it applicable for a wide range of portable applications.
If an input power supply is present, the MP2672A operates in boost mode to charge the battery with two cells in series. If charging is enabled, the MP2672A automatically detects the battery voltage and charges the battery in three phases: pre-charge, constant current charge, and constant voltage charge. Other features include charge termination and auto-recharge.
The device has a narrow voltage DC (NVDC) power structure. With a deeply discharged battery, the MP2672A regulates the system output to a minimum voltage level. This powers the system instantly while simultaneously charging the battery via the battery FET. The MP2672A also provides a cell balance function. This monitors the voltage across each cell, then equalizes the cell’s voltages if the difference between the two cells exceeds the mismatch threshold.
The MP2672A has two configuration modes: standalone mode and host-control mode. In standalone mode, the charging parameters can be configured via hardware pins. In host-control mode, the charging parameters can be configured via the I2C registers.
Diverse and robust protections include a thermal regulation loop for decreasing the charge current in case the junction temperature exceeds the thermal loop threshold, and JEITA-compliant battery temperature protection. Other safety features include input over-voltage protection (OVP), battery OVP, thermal shutdown, battery temperature monitoring, a watchdog timer, and a configurable backup timer to prevent prolonged charging of a dead battery.
The MP2672A is available in a QFN-18 (2mmx3mm) package.
Show moreShow less
Log in to your account
Create New Account
Forgot Password
Log in to continue
myMPS+
A Plus account is required to perform this action. Log in to your myMPS+ account orcreate one now.
Don’t have a myMPS+ account yet?
Get early access to new products, datasheets, and free samples.
The EVKT-MP2672A is an evaluation kit for the MP2672A, which can be controlled by the GUI to charge and discharge 2-cell batteries. Its layout accommodates most commonly used components. The default function of this board is preset for host-control mode, and the battery regulation voltage is preset to 8.4V for 2-cell Li-ion batteries.
Log in to your account
Create New Account